NCP380HSNAJAGEVB: 100mA ~ 2.1A, 2.5 ~ 5.5 Vin, High Side Switch

Summary

The NCP380 is a high-side power distribution switch designed for applications where heavy capacitive loads and short-circuits are likely to be encountered, incorporating a 70 mΩ (DFN package), P channel MOSFET in a single package.

The device limits the output current to a desired level by switching into a regulation current-mode when the output load exceeds the current-limit threshold or a short is present. The current limit threshold is either user adjustable between 100mA and 2.1A via an external resistor or internally fixed.The power switch rise and fall times are controlled to minimize current ringing during switching.

An internal reverse-voltage detection comparator disables the power-switch if the output voltage is higher than the input voltage to protect devices on the input side of the switch. The /FLAG logic output asserts low during over current, reverse-voltage or over temperature conditions. The switch is controlled by a logic enable input active high or low.

Specifications

Manufacturer	onsemi
Category	Power Management
Sub-Category	Load or Power Distribution Switches
Eval Board Part Number	NCP380HSNAJAGEVBOS-ND
Eval Board Supplier	onsemi
Eval Board	Board not Stocked
Current Out	2.1 A
Voltage In	2.5 ~ 5.5 V
Features	Current Limit (Adj. or Fixed) Reverse Polarity Protection Shutdown, Enable, Standby Soft Start Thermal Protection Under Voltage Protection, Brown-Out
On Resistance (Typ) @ Vin	70 mΩ @ 5.5 V
Standby Current [Typical]	1 µA
Power Dissipation (Max)	830 mW
Quiescent Current [Typical]	- Not Given
Component Count + Extras	6 + 10
Application / Target Market	Computers LCD TV / Monitor Tablets USB Powered Devices
Design Author	ONSemiconductor
Main I.C. Base Part	NCP380
Standby Current [Maximum]	2.1 µA
Quiescent Current [Maximum]	90 µA
Date Created By Author	2011-11
Date Added To Library	2017-03